MENU
(800) 661‑2023
Products
Level Measurement Devices
Dataloggers & Telemetry
Groundwater Samplers
Multilevel Systems
Enhanced Biodegradation
Direct-Push Equipment
Field Equipment
Applications
Groundwater Monitoring
Surface Water Monitoring
Soil Gas Vapour Monitoring
Groundwater Remediation
Contact
Events
Blog
Languages
English
Español
Français
Login
Downloads
Solinst Cloud
SolSat 5
Distributors
AquaVent 5
Products
Info
Instructions
Quote
AquaVent 5 SDI-12 User Guide
Home
>
,
Products
>
,
Dataloggers & Telemetry
>
,
AquaVent 5
>
,
Instructions
>
SDI-12 User Guide
>
AquaVent 5 Main Page
Get a Quote
Send Me Info
SDI-12 User Guide
1
Introduction
1.1
SDI-12 Interface
1.2
LED Status
2
AquaVent Independent Recording Option
2.1
Data Downloading and Programming in Field
3
AquaVent SDI-12 Setup
3.1
Setting the SDI-12 Device Address
3.2
AquaVent SDI-12 Installation
4
Aquavent SDI-12 Operation
4.1
The SDI-12 Address
4.2
Activation and Verification
4.3
Changing or Updating AquaVent Loggers
4.4
Changing SPX Wellhead Batteries
4.5
AquaVent Firmware Upgrades
5
SDI-12 Supported Commands
5.1
Acknowledge Active Command: a!
5.2
Address Query Command: ?!
5.3
Send Identification Command: aI!
5.4
Change Address Command: aAb!
5.5
Start Measurement Command: aM!
5.6
Start Measurement Command with Checksum: aMC!
5.7
Send Data Command: aD0!
5.8
Start Concurrent Measurement Command: aC!
5.9
Start Concurrent Measurement with Checksum: aCC!
5.10
Start Verification Command: aV!
6
Troubleshooting
7
References
Table of Contents
Download PDF (1 MB)
Model 3001
Levelogger 5
Model 3001
Levelogger 5 LTC
Model 9100
STS Telemetry
Products
Dataloggers & Telemetry
3001 Levelogger 5
Get a Quote
Levelogger 5 Datasheet
Applications
Sampling Options
Levelogger Well Caps
Deployment Options
Barometric Compensation
Levelogger Specifications
Portable Data Transfer & Telemetry
Instructions
3001 Levelogger® 5 Series Quick Start Guide
Installing the Software
Installing the Hardware
Programming the Levelogger
Starting and Stopping the Levelogger
Downloading and Working with Data
Real Time View
Compensate the Data
Levelogger 5 Field Measurement
Levelogger Field Notes
In-field Communication
Maintenance
Frequently Asked Questions
Troubleshooting Guide
3001 Levelogger® 5 Series Software User Guide
1 Introduction
1.1 Levelogger Series
1.1.1 Levelogger 5
1.1.2 Barologger 5
1.1.3 Levelogger 5 Junior
1.1.4 Levelogger 5 LTC
1.1.5 Rainlogger 5
1.1.6 Levelogger Edge
1.1.7 Barologger Edge
1.1.8 Levelogger Junior Edge
1.1.9 LTC Levelogger Edge
1.1.10 Rainlogger Edge
1.2 Measurement Parameters
1.2.1 Level
1.2.1.1 Pressure Calibration
1.2.2 Barometric Pressure
1.2.3 Temperature
1.2.4 Conductivity
1.2.4.1 Calibration of the Conductivity Sensor
1.2.5 Total Rainfall
2 Communicating with Solinst Dataloggers
2.1 Optical Readers
2.2 PC Interface Cable
2.3 Backwards Compatibility
3 System Requirements and Software Installation
3.1 System Requirements
3.2 Software Installation
4 Startup, Configurations and Settings
4.1 Startup
4.1.1 Software/Firmware Update Checks
4.1.2 Communicating with a USB Port
4.1.2.1 HID-Compliant USB Devices
4.1.2.2 Older Style USB Devices
4.2 Configuration and Settings
4.2.1 Data Directory
4.2.2 File Name Settings
4.2.3 Default File Type
5 Levelogger Series Setup
5.1 Datalogger Settings
5.1.1 Setting Up Channel Information
5.1.1.1 Level Channel (Ch1)
5.1.1.2 Temperature Channel (Ch2)
5.1.1.3 Conductivity Channel (Ch3)
5.1.1.4 Rainloggers
5.2 Datalogger Information
5.3 Datalogger Memory
5.4 Datalogger Time
5.5 Datalogger Sampling Mode
5.6 Datalogger Memory Mode
5.7 Saving and Retrieving Levelogger Settings Files
5.8 Starting and Stopping the Datalogger
6 Conductivity Calibration
6 Introduction to Conductivity Calibration
6 Setting Temperature Coefficient
6 Conductivity Calibration Setup
6 LTC Levelogger Rinsing Process
6.1 Restore Factory LTC Levelogger Calibration
7 Data Control
7.1 Downloading Options and Saving Data Files
7.1.1 Default File Format
7.1.2 Downloading Data
7.1.3 Saving Data
7.2 Graph Manipulation and Zoom Function
7.3 File Export and Print Function
8 Data Compensation
8.1 Data Wizard
8.1.1 Basic Compensation
8.1.2 Advanced Compensation
8.2 Manual Barometric Compensation
9 Real Time View
10 Installation and Maintenance of Leveloggers
10.1 Installation
10.1.1 Free Suspended Installations
10.1.1.1 Suspension Wire/Rope Installation
10.1.1.2 Direct Read Cable Assembly Installation
10.1.1.3 Model 3001 Well Cap Assembly
10.1.2 Fixed Installations
10.1.2.1 Artesian Monitoring
10.1.2.2 Vacuum Monitoring
10.1.3 Barologger Installation
10.1.3.1 Barometric Efficiency
10.1.4 Rainlogger Installation
10.1.5 Installation in Extreme Environments
10.1.5.1 Freezing or High Temperature Conditions
10.1.5.2 Marine or Brackish Installations
10.1.5.3 Biofouling Conditions
10.2 Levelogger Maintenance
11 Diagnostics Utility
11.1 Run Diagnostics
11.2 Read Memory Dump
11.3 Create Report
11.4 Email Report
11.5 LTC Calibration History Report
11.6 Software/Firmware Updates
12 Firmware Upgrade Utility
13 Trouble Shooting
Appendix
Levelogger Gold
Barologger Gold
Levelogger Junior
LTC Levelogger Junior
Rainlogger
Table of Contents
3001 Leveloader™ User Guide
1 Getting Started
2 Leveloader Gold
3 System Requirements
4 Software Installation
5 Installing USB Drivers
5.1 USB Installation for Windows XP
5.1.1 Manual USB Installation
5.2 USB Installation for Windows 7
5.3 Enabling USB Installation for Windows 8
5.4 USB Installation for Windows 10
5.4.1 Disable Driver Signature Enforcement for Windows 10
6 Hardware
7 Leveloader Gold Menu
7.1 Connect to Levelogger
7.2 View Stored Data
7.3 Data to PC
7.4 Leveloader Setup
7.4.1 Time Setup
7.4.2 Restore Factory Settings
7.4.3 Contrast Control
7.4.4 Leveloader Information
7.4.5 Erase Most Recent Log
8 Levelogger Menu
8.1 Real Time - View Only
8.2 Data from Levelogger
8.3 Info from Levelogger
8.4 Edit Levelogger
8.4.1 Edit Date/Time
8.4.2 Edit Project ID and Location
8.4.3 Edit Sampling Rate and Sampling Type
8.4.4 Edit Unit
8.4.5 Edit Altitude
8.5 Load Levelogger Settings Files
8.6 Restart Levelogger
8.7 Security
9 Levelogger Software and Leveloader Gold
9.1 Customizable Levelogger Settings File Setup
9.2 Erase Data
9.3 Clock Synchronization
9.4 Password Setup
10 Firmware Upgrade Utility
Table of Contents
3001 Leveloader™ Quick Start Guide - PDF (373 KB)
3001 Levelogger 5 Deployment & Communication
3001 Levelogger 5 vs. Levelogger Edge
3001 Levelogger 5 vs. 3250 LevelVent 5
SDI-12 User Guide
1 Introduction
1.1 Compatibility
1.2 SDI-12 Interface Cable
1.3 LED Status
2 Levelogger Independent Recording Option
2.1 Data Downloading and Programming in Field
3 Installation
4 Operation
4.1 Setting the SDI-12 Address
4.2 Activation and Verification
4.3 Changing Leveloggers
5 SDI-12 Supported Commands
5.1 Acknowledge Active Command (a!)
5.2 Address Query Command (?!)
5.3 Send Identification Command (aI!)
5.4 Change Address Command (aAb!)
5.5 Start Measurement Command (aM!)
5.6 Start Measurement Command with Checksum (aMC!)
5.7 Send Data Command (aD0!)
5.8 Start Concurrent Measurement Command (aC!)
5.9 Start Concurrent Measurement w Checksum (aCC!)
5.10 Start Verification Command (aV!)
6 Trouble Shooting
7 References
Table of Contents
Artesian Well Fitting Assembly
L5 Optical Adaptors
Connecting Direct Read Cable to Reel
Product Tour
3001 Levelogger 5 Junior
Get a Quote
Levelogger 5 Junior
Datasheet
Levelogger Comparison
3001 Levelogger 5 LTC
Get a Quote
Levelogger 5 LTC Datasheet
3002 Rainlogger 5
Get a Quote
Rainlogger 5 Datasheet
Instructions
3002 Rainlogger 5 Setup
3250 LevelVent 5
Get a Quote
LevelVent 5 Datasheet
Vented Water Level Datalogger
Specifications
Instructions
LevelVent 5 Quick Start Guide
Getting Started
Programming the LevelVent 5
Starting and Stopping the LevelVent 5
Downloading and Working with Data
Real Time View
Compensate the Data
LevelVent 5 Ranges
Measurement Fundamentals
LevelVent 5 Field Notes
In-Field Communication
Remote Monitoring Options
Maintenance
Troubleshooting Guide
LevelVent 5 User Guide
1 Introduction
1.1 Vented Water Level Dataloggers
1.1.1 LevelVent 5
1.1.2 AquaVent 5
1.1.3 LevelVent
1.1.4 AquaVent
1.2 Measurement Parameters
1.2.1 Level
1.2.1.1 Pressure Calibration
1.2.2 Temperature
1.3 LevelVent System Components
1.3.1 LevelVent Communication Wellhead
1.4 AquaVent System Components
1.4.1 AquaVent Wellhead and Connector Cables
1.4.1.1 SPX Wellhead LED Status
1.5 Vented Cable
1.5.1 Vented Cable Connections
1.5.1.1 Connecting to the LevelVent Wellhead
1.5.1.2 Connecting to the AquaVent Wellhead
1.5.1.3 Connecting to the Logger
1.5.2 Vented Cable Precautions
2 Solinst Levelogger Software
2.1 System Requirements
2.2 Software Installation
2.3 Software Communication
3 Software Startup, Configurations and Settings
3.1 Startup
3.1.1 Software/Firmware Update Checks
3.2 Configuration and Settings
3.2.1 Data Directory
3.2.2 File Name Settings
3.2.3 Default File Type
4 Datalogger Programming
4.1 Datalogger Settings
4.1.1 Setting Up Channel Information
4.1.1.1 Level Channel (Ch1)
4.1.1.2 Temperature Channel (Ch2)
4.2 Datalogger Information
4.3 Datalogger Memory
4.4 Datalogger Time
4.5 Datalogger Sampling Mode
4.6 Datalogger Memory Mode
4.7 Saving and Retrieving Datalogger Settings Files
4.8 Datalogger Zero
4.9 Starting and Stopping the Datalogger
5 Data Control
5.1 Downloading Options and Saving Data Files
5.1.1 Default File Format
5.1.2 Downloading Data
5.1.3 Saving Data
5.2 Graph Manipulation and Zoom Function
5.3 File Export and Print Function
6 Data Compensation
6.1 Data Wizard
7 Real Time View
8 Vented Datalogger Installation
8.1 Installing the LevelVent
8.1.1 Installing LevelVent in 2" Well
8.2 Installing the AquaVent
8.2.1 Installing AquaVent Wellhead Batteries
8.2.1.1 Wellhead Battery Life Estimates
8.2.2 Installing AquaVent in 2" Well
8.3 Logger Orientation
8.4 Logger Installation Depth
8.5 Installation Precautions
8.6 Installation in Extreme Environments
8.6.1 Freezing or High Temperature Conditions
8.6.2 Marine or Brackish Installations
8.6.3 Biofouling Conditions
9 Vented Datalogger Maintenance
9.1 Logger Maintenance
9.2 Vented Cable Maintenance
9.2.1 Vented Cable Blowout Fitting
9.3 Wellhead Maintenance
10 Diagnostics Utility
10.1 Run Diagnostics
10.2 Read Memory Dump
10.2.1 File Conversion (hex to xle)
10.3 Create Report
10.4 Email Report
10.5 Software/Firmware Updates
10.6 Reset AquaVent Battery Indicator
10.7 Clear Datalogger Zero
11 Firmware Upgrade Utility
12 Troubleshooting
12.1 Problems During Installation of Levelogger Software
12.2 Error During Software Uninstall Process
12.3 Data Has Been Erased Accidentally
12.4 Error Messages During Use of Software
Table of Contents
Water Level Datalogger Comparison - Levelogger 5 vs. LevelVent 5
LevelVent: Hardware Compatibility - PDF (518 KB)
3500 AquaVent 5
Get a Quote
AquaVent 5 Datasheet
Vented Water Level Datalogger
Communication Options
Setup
Specifications
Instructions
AquaVent 5 Quick Start Guide
Getting Started
Programming AquaVent 5 Loggers
Starting and Stopping AquaVent 5 Loggers
Downloading and Working with Data
Real Time View
Compensate the Data
AquaVent 5 Ranges
Measurement Fundamentals
AquaVent 5 Field Notes
In-Field Communication
LED: Wellhead Connection Status
Maintenance
Troubleshooting
AquaVent 5 User Guide
1 Introduction
1.1 Vented Water Level Dataloggers
1.1.1 LevelVent 5
1.1.2 AquaVent 5
1.1.3 LevelVent
1.1.4 AquaVent
1.2 Measurement Parameters
1.2.1 Level
1.2.1.1 Pressure Calibration
1.2.2 Temperature
1.3 LevelVent System Components
1.3.1 LevelVent Communication Wellhead
1.4 AquaVent System Components
1.4.1 AquaVent Wellhead and Connector Cables
1.4.1.1 SPX Wellhead LED Status
1.5 Vented Cable
1.5.1 Vented Cable Connections
1.5.1.1 Connecting to the LevelVent Wellhead
1.5.1.2 Connecting to the AquaVent Wellhead
1.5.1.3 Connecting to the Logger
1.5.2 Vented Cable Precautions
2 Solinst Levelogger Software
2.1 System Requirements
2.2 Software Installation
2.3 Software Communication
3 Software Startup, Configurations and Settings
3.1 Startup
3.1.1 Software/Firmware Update Checks
3.2 Configuration and Settings
3.2.1 Data Directory
3.2.2 File Name Settings
3.2.3 Default File Type
4 Datalogger Programming
4.1 Datalogger Settings
4.1.1 Setting Up Channel Information
4.1.1.1 Level Channel (Ch1)
4.1.1.2 Temperature Channel (Ch2)
4.2 Datalogger Information
4.3 Datalogger Memory
4.4 Datalogger Time
4.5 Datalogger Sampling Mode
4.6 Datalogger Memory Mode
4.7 Saving and Retrieving Datalogger Settings Files
4.8 Datalogger Zero
4.9 Starting and Stopping the Datalogger
5 Data Control
5.1 Downloading Options and Saving Data Files
5.1.1 Default File Format
5.1.2 Downloading Data
5.1.3 Saving Data
5.2 Graph Manipulation and Zoom Function
5.3 File Export and Print Function
6 Data Compensation
6.1 Data Wizard
7 Real Time View
8 Vented Datalogger Installation
8.1 Installing the LevelVent
8.1.1 Installing LevelVent in 2" Well
8.2 Installing the AquaVent
8.2.1 Installing AquaVent Wellhead Batteries
8.2.1.1 Wellhead Battery Life Estimates
8.2.2 Installing AquaVent in 2" Well
8.3 Logger Orientation
8.4 Logger Installation Depth
8.5 Installation Precautions
8.6 Installation in Extreme Environments
8.6.1 Freezing or High Temperature Conditions
8.6.2 Marine or Brackish Installations
8.6.3 Biofouling Conditions
9 Vented Datalogger Maintenance
9.1 Logger Maintenance
9.2 Vented Cable Maintenance
9.2.1 Vented Cable Blowout Fitting
9.3 Wellhead Maintenance
10 Diagnostics Utility
10.1 Run Diagnostics
10.2 Read Memory Dump
10.2.1 File Conversion (hex to xle)
10.3 Create Report
10.4 Email Report
10.5 Software/Firmware Updates
10.6 Reset AquaVent Battery Indicator
10.7 Clear Datalogger Zero
11 Firmware Upgrade Utility
12 Troubleshooting
12.1 Problems During Installation of Levelogger Software
12.2 Error During Software Uninstall Process
12.3 Data Has Been Erased Accidentally
12.4 Error Messages During Use of Software
Table of Contents
AquaVent 5 MODBUS User Guide
1 Introduction
1.1 MODBUS Interface Overview
1.2 LED Status
2 AquaVent Independent Recording Option
2.1 Data Downloading and Programming in Field
3 AquaVent MODBUS Installation
3.1 Setting the MODBUS Device Address
3.2 Wiring Overview
3.2.1 RS-232 Connection
3.2.2 RS-485 Connection
3.3 AquaVent Setup and Startup
3.3.1 AquaVent Setup
3.3.2 AquaVent Startup Notes
4 AquaVent MODBUS Operation
4.1 AquaVent MODBUS Configuration Overview
4.2 AquaVent MODBUS Data Types
4.3 AquaVent Supported MODBUS Functions
4.4 AquaVent MODBUS Register Map
4.5 AquaVent MODBUS Status and Diagnostic Codes
4.5.1 Device Status
4.5.2 Diagnostic Tests
4.5.3 Exception Response Codes
5 Maintenance and Troubleshooting
5.1 Maintenance
5.1.1 Changing or Updating AquaVent Loggers
5.1.2 Changing SPX Wellhead Batteries
5.1.3 Firmware Upgrades
5.2 Troubleshooting
6 Appendix: Additional MODBUS Information
6.1 Endian Order and Byte Packing
6.2 AquaVent Register Offset Assumptions
7 References
Table of Contents
AquaVent 5 SDI-12 User Guide
1 Introduction
1.1 SDI-12 Interface
1.2 LED Status
2 AquaVent Independent Recording Option
2.1 Data Downloading and Programming in Field
3 AquaVent SDI-12 Setup
3.1 Setting the SDI-12 Device Address
3.2 AquaVent SDI-12 Installation
4 Aquavent SDI-12 Operation
4.1 The SDI-12 Address
4.2 Activation and Verification
4.3 Changing or Updating AquaVent Loggers
4.4 Changing SPX Wellhead Batteries
4.5 AquaVent Firmware Upgrades
5 SDI-12 Supported Commands
5.1 Acknowledge Active Command: a!
5.2 Address Query Command: ?!
5.3 Send Identification Command: aI!
5.4 Change Address Command: aAb!
5.5 Start Measurement Command: aM!
5.6 Start Measurement Command with Checksum: aMC!
5.7 Send Data Command: aD0!
5.8 Start Concurrent Measurement Command: aC!
5.9 Start Concurrent Measurement with Checksum: aCC!
5.10 Start Verification Command: aV!
6 Troubleshooting
7 References
Table of Contents
3001 Levelogger Edge vs. 3500 AquaVent
AquaVent Hardware Compatibility - PDF (645 KB)
Technical Bulletins
301 Water Level Temperature Sensor
Get Quote
Datasheet
Specifications
Instructions
Water Level Temperature Sensor (WLTS) Quick Start Guide
Getting Started
Programming the Water Level Temperature Sensor (WLTS)
Connecting the Communication/Vented Cable
Wiring Connections for MODBUS/SDI-12
Water Level Temperature Sensor Field Notes
Maintenance
Water Level Temperature Sensor (WLTS) SDI-12 User Guide
1 Introduction
1.1 WLTS SDI-12 Interface Overview
1.2 WLTS SDI-12 System Components
1.3 Sensor Overview & Measurement Parameters
1.3.1 Absolute Level
1.3.2 Vented (Gauge) Level
1.3.3 Temperature
1.4 Communication/Vented Cables
1.4.1 Communication Cable Connections
2 WLTS Software Utility
2.1 Communicating with the WLTS Utility
2.2 Programming the Water Level Temperature Sensor
3 SDI-12 Wiring Setup and Installation
3.1 SDI-12 Wiring Setup
3.2 Installation
3.2.1 Installation in a 2" Well
3.2.2 Biofouling Conditions
4 WLTS SDI-12 Operation
4.1 The SDI-12 Address
4.2 Activation and Verification
5 SDI-12 Supported Commands
5.1 Acknowledge Active Command: a!
5.2 Address Query Command: ?!
5.3 Send Identification Command: aI!
5.4 Change Address Command: aAb!
5.5 Start Measurement Command: aM!
5.6 Start Measurement Command with Checksum: aMC!
5.7 Send Data Command: aD0!
5.8 Start Concurrent Measurement Command: aC!
5.9 Start Concurrent Measurement Command with Checksum: aCC!
5.10 Start Verification Command: aV!
6 Maintenance and Troubleshooting
6.1 Maintenance
6.1.1 Sensor Maintenance
6.1.1.1 Changing or Updating WLTS
6.1.2 Communication/Vented Cable Maintenance
6.2 Firmware Updates
6.3 Troubleshooting
7 References
Table of Contents
Water Level Temperature Sensor (WLTS) MODBUS User Guide
1 Introduction
1.1 WLTS MODBUS Interface Overview
1.2 WLTS MODBUS System Components
1.3 Sensor Overview & Measurement Parameters
1.3.1 Absolute Level
1.3.2 Vented (Gauge) Level
1.3.3 Temperature
1.4 Communication/Vented Cables
1.4.1 Communication Cable Connections
2 WLTS Software Utility
2.1 Communicating with the WLTS PC Software Utility
2.2 Programming the Water Level Temperature Sensor
3 MODBUS Wiring Setup and Installation
3.1 MODBUS Wiring Connection
3.2 Installation
3.2.1 Installation in a 2" Well
3.2.2 Biofouling Conditions
4 WLTS MODBUS Operation
4.1 WLTS MODBUS Configuration Overview
4.2 WLTS MODBUS Support Functions
4.3 WLTS MODBUS Holding Registers
4.4 WLTS MODBUS Input Registers
4.5 WLTS MODBUS Exception Code
5 Maintenance and Troubleshooting
5.1 Maintenance
5.1.1 Sensor Maintenance
5.1.1.1 Changing or Updating WLTS
5.1.2 Communication/Vented Cable Maintenance
5.2 Firmware Updates
5.3 Troubleshooting
6 Appendix: Additional MODBUS Information
7 References
Table of Contents
Water Level Temperature Sensor (WLTS) 4-20mA User Guide
1 Introduction
1.1 WLTS 4-20mA Interface Overview
1.2 WLTS 4-20mA System Components
1.3 Sensor Overview & Measurement Parameters
1.3.1 Absolute Level
1.3.2 Vented (Gauge) Level
1.3.3 Temperature
1.4 Communication/Vented Cables
1.4.1 Communication Cable Connections
2 WLTS Software Utility
2.1 Communicating with the WLTS PC Software Utility
2.2 Programming the Water Level Temperature Sensor
2.3 WLTS Current Loop Adaptor Diagnostics
3 4-20mA Wiring Setup and Installation
3.1 4-20mA Wiring Connection
3.2 Installation
3.2.1 Installation in a 2" Well
3.2.2 Biofouling Conditions
4 WLTS 4-20mA Operation
4.1 4-20mA Current Calculations
5 Maintenance
5.1 General Maintenance
5.1.1 Sensor Maintenance
5.1.1.1 Changing or Updating WLTS
5.1.2 Communication/Vented Cable Maintenance
5.2 Firmware Updates
Table of Contents
4001 SRU
Get Quote
Datasheet
Instructions
SRU Quick Start Guide
Transferring Data to a PC
SRU User Guide
1 Introduction
1.1 Solinst Readout Unit (SRU)
1.2 SRU Specifications
1.3 Compatibility
2 SRU Operation
2.1 Start Up
2.2 LCD Display and Navigation
2.3 Main Menu
2.4 LCD Contrast
2.5 SRU Status
3 Connecting Dataloggers
3.1 Levelogger Connection
3.2 LevelVent Connection
3.3 AquaVent Connection
4 Real-Time Readings
4.1 Take a Reading
4.2 Barometric Compensation
4.3 Real-Time Logging
5 Downloading and Viewing Data Files
5.1 Download Logger
5.2 View Data Files
6 Datalogger Status
7 Levelogger Software and Data Management
7.1 Software Requirements and Installation
7.2 Transfer Data
7.3 View Data
7.4 Erase Data
7.5 Synchronize SRU Time
8 Maintenance
8.1 Battery Installation
8.2 Software and Firmware Updates
8.3 Firmware Upgrade Utility
Appendix 1: Full SRU Menu Sequence
Table of Contents
3001 Levelogger 5 App Interface
Get a Quote
Datasheet for Apple®
Levelogger 5 App Interface
Datasheet for Android
Levelogger 5 App Interface
Instructions
3001 Levelogger 5 App Interface Quick Start Guide for Apple®
3001 Levelogger 5 App Interface Quick Start Guide for Android™
3001 Levelogger 5 App Interface User Guide
1 Introduction
1.1 Compatibility
2 Levelogger App Interface
2.1 Specifications
2.2 Installing Batteries
2.3 Power Button
2.4 LED Status
2.5 Deployment
2.5.1 Levelogger Deployment
2.5.2 LevelVent Deployment
2.5.3 AquaVent Deployment
3 Activating the System
4 Solinst Levelogger App
4.1 Downloading the App
4.2 Navigation Menu
4.3 User Defaults
4.4 App Information
4.5 Connecting Dataloggers
4.5.1 Datalogger Firmware
4.6 Dataloggers Home Screen
5 Downloading Data
6 Edit Datalogger Settings
6.1 Datalogger Identification
6.2 Datalogger Status
6.3 Datalogger Sampling Mode
6.3.1 Linear Sampling
6.3.2 Event Sampling
6.3.3 Schedule Sampling
6.4 Datalogger Channels
6.4.1 Channel 1: Level
6.4.2 Channel 2: Temperature
6.4.3 Channel 3: Conductivity
6.4.4 Rainlogger Channel
6.5 Datalogger Time
6.6 Data Set Geographic Location
6.7 Vented Dataloggers Zero
6.8 Starting and Stopping Solinst Dataloggers
6.8.1 Starting Solinst Dataloggers
6.8.2 Stopping Solinst Dataloggers
7 Saved Settings
7.1 Program Settings
7.2 Apply Settings
8 Real-Time View
9 Viewing Saved Data Logs
10 Sharing Data Logs
10.1 E-mailing Data Logs
10.2 Transferring Data Logs
11 Diagnostics
11.1 Run Diagnostics
11.2 Send Report
11.3 Load Previous Logs
11.4 LTC Calibration History Report
11.5 Regenerate Data Files
11.6 Clear Datalogger Zero
12 Conductivity Calibration
Table of Contents
Product Tour
3001 DataGrabber 5
Get a Quote
DataGrabber 5 Datasheet
Instructions
DataGrabber 5 Instructions
DataGrabber Firmware Upgrade Instructions
Product Tour
3001 Biofoul Screen
Get a Quote
Biofoul Screen Datasheet
Instructions
Biofoul Screen Instructions
3001 Direct Read to Optical Adaptor - PDF (486 KB)
3001 Well Caps
Get a Quote
Well Caps Datasheet
Locking Well Caps for Leveloggers
Dedicated Well Cap Manifold for Pumps
Instructions
Well Cap Assembly
Dataloggers & Telemetry
Absolute Precision Water Level and Temperature Datalogging
Additional Datalogging Options
Enhance Your Monitoring Network
Convenient Levelogger Software
Levelogger Programming and Deployment
Maintenance-Free Vented Water Level Measurement
Make Data Collection More Efficient
Simple Field Data Transfer Device
Versatile Submersible Water Level Transmitter
Simple Telemetry for Solinst Dataloggers
Discover Anywhere Monitoring
Remote Monitoring Solutions
On The Level
Connect With Us
Levelogger 5 FAQ
Applications
Installation
Monitoring
Maintenance and Proper Use
Technical Bulletins
Hardware Compatibility - PDF (1 MB)
Datalogger Comparison - PDF (210 KB)
Telemetry Systems
Get a Quote
Telemetry Overview
Why Use Telemetry Systems?
Telemetry Selection Chart
9500 LevelSender 5
Get Quote
Datasheet
Operation
Features
Instructions
LevelSender 5 Preparation Guide
LevelSender 5 Quick Start Guide
Hardware Setup
Software Setup
Setup Wizard
Installation
Remote Updates
LevelSender 5 User Guide
1 Introduction
1.1 Compatibility
2 LevelSender Overview
2.1 LevelSender Remote Stations
2.1.1 LED Light Identification
2.1.2 LevelSender Antenna
2.2 Wireless Carrier Requirements
2.2.1 Installing the SIM Card
2.3 LevelSender Batteries
2.3.1 Installing LevelSender Batteries
2.3.2 LevelSender Battery Life Estimates
2.4 Connecting Dataloggers
2.4.1 Connecting Leveloggers
2.4.2 Connecting a LevelVent
2.4.3 Splitters
3 LevelSender Software
3.1 System Requirements
3.2 Software Installation
3.3 LevelSender Software Communication
3.4 LevelSender Software Main Window
3.4.1 LevelSender Software Options
3.4.2 Connected LevelSender Software Options
4 LevelSender Configuration
4.1 Home Station Email Setup
4.1.1 Checking Home Station Email
4.2 LevelSender Setup Wizard
4.2.1 Connecting to the LevelSender
4.2.2 SIM Card Settings
4.2.3 LevelSender Email Setup
4.2.4 Data Recipient Setup
4.2.5 LevelSender Setup
4.2.6 Alarm Setup
4.2.7 Pre-Start Diagnostics
4.3 LevelSender Changes
4.3.1 LevelSender Updates via USB
4.3.2 Remote LevelSender Updates
5 LevelSender Data
5.1 Data From Email
5.2 Data From SMS
5.3 Data From LevelSender Software
5.3.1 Viewing Emails
5.3.2 Viewing and Exporting Data Files
5.4 Home Station Database
5.5 FTP Exprt Settings
6 LevelSender Installation
6.1 Installing a LevelSender in a Well
6.2 LevelSender Installation Examples
6.3 LevelVent Installation
6.4 Signal Strength and Antenna Considerations
6.4.1 Optional Antenna
7 LevelSender Maintenance
7.1 Firmware Updates
8 LevelSender Troubleshooting
8.1 LevelSender Diagnostic Information
8.2 Can Not Communicate with LevelSender Software
8.3 Test Email Failed During Setup
8.4 Home Station Not Receiving Reports
8.5 Receiving Erroneous Data Reports
8.6 Remote Email Commands
9 Appendix
9.1 Gmail Setup Information
9.1.1 IMAP Setup
9.1.2 POP Setup
9.1.3 App Passwords in Gmail Accounts
9.2 Yahoo Mail Setup Information
9.2.1 IMAP Setup
9.2.2 POP Setup
9.3 Additional Email Notes
Table of Contents
LevelSender 5 External Antenna Cable Seal Kit Instructions
Solinst Cloud
Datasheet
Instructions
Solinst Cloud Quick Start Guide - LevelSender
Getting Started
Register for Solinst Cloud
Create a Project
Connect LevelSender to Computer
Add a Device (LevelSender)
Data Collection
Remote Updates
Diagnostics
Solinst Cloud LevelSender Field Utility
Solinst Cloud User Guide - LevelSender
1 Introduction
1.1 Compatibility
1.2 System Requirements
2 Getting Started with Solinst Cloud
2.1 Registration
2.1.2 Select a Plan
2.1.3 Payment and Invoicing
2.2 Account Settings
2.3 Members
3 Solinst Cloud Dashboard
3.1 My Projects
3.2 Data Storage
3.3 Dashboard Map
3.4 Data Logs Pending Approval
3.5 Upload Data Logs
4 Solinst Cloud Projects
4.1 Create a New Project
4.2 Project View
4.2.1 Project Members
4.2.2 Project Access
4.2.3 Devices
4.2.4 Data Logs
4.2.5 Project Map
4.3 Alarms
5 LevelSender Device Management
5.1 Connected LevelSender Options
5.1.1 Adding a LevelSender
5.1.2 LevelSender Setup
5.1.3 Alarm Setup
5.1.4 Pre-Start Diagnostics
5.2 Remote LevelSender Options
5.2.1 LevelSender Settings
5.2.2 Alarm Notification Recipients
5.2.3 Remote LevelSender Changes
6 Data Management
6.1 Project Data Report
6.1.1 Downloading Reports
7 Diagnostics and Troubleshooting
7.1 LevelSender Diagnostics
7.2 Troubleshooting
7.2.1 LevelSender 5 Troubleshooting
8 Solinst Cloud LevelSender Field Utility
9700 SolSat 5
Datasheet
Features
Specifications
Instructions
SolSat 5 Quick Start Guide
Getting Started
Connect Dataloggers
Connecting to the Wi-Fi App
SolSat 5 Satellite Telemetry Setup
SolSat 5 Satellite Telemetry Data Collection
Download Data Logs
SolSat 5 Satellite Telemetry Installation
SolSat 5 Email and Text Messages
SolSat 5 Satellite Telemetry Maintenance
SolSat 5 Satellite Telemetry Diagnostics
SolSat 5 Satellite Telemetry Compatibility
SolSat 5 User Guide
1 Introduction
1.1 Compatibility
2 SolSat 5 Satellite Telemetry Overview
2.1 SolSat 5 Telemetry Stations
2.2 Data Plan Options
2.3 SolSat 5 Batteries
2.4 Connecting Dataloggers
2.4.1 Connecting Leveloggers
2.4.2 Connecting a LevelVent
3 SolSat 5 Wi-Fi App
3.1 Connecting to the Wi-Fi App
3.2 Wi-Fi App Main Menu
3.3 SolSat 5 Wi-Fi App Main Screen
3.4 Wi-Fi App Configuration
3.4.1 Wi-Fi Security Setup
3.4.2 GPS Coordinates Style
4 SolSat 5 Setup
4.1 Select Your Plan
4.2 Current Time Offset
4.3 Data Format
4.4 Alarm Settings
4.5 Parameter Settings
4.6 Data Transmission Settings
5 SolSat 5 Data and Site Management
5.1 Solinstsat.com Web Portal
5.1.1 Site Index
5.1.1.1 Site Management
5.1.1.2 Manage Virtual Units
5.1.1.3 Manage Notifications
5.1.2 Device Index
5.1.2.1 Device Deta
5.1.2.2 Manage Device
5.1.2.3 Date Range View
5.1.2.4 Configure Graph
5.1.2.5 Graph View
5.1.2.6 Graph Range View
5.1.3 Alarm Management
5.1.3.1 Alarm Contacts
5.1.3.2 Create Alarm
5.1.4 Master Reports
5.1.4.1 Create Report
5.1.4.2 Manage Reports
5.1.5 User Management
5.1.5.1 Create New User
5.1.5.2 Manage Users
5.2 Download Data Logs
6 SolSat 5 Email and Text Messages
6.1 SolSat 5 Mailbox
6.2 SolSat 5 Contacts
6.3 Send Email
6.4 Send Text
7 SolSat 5 Installation
7.1 Optional Solar Panel
8 SolSat 5 Maintenance
9 SolSat 5 Diagnostics & Troubleshooting
Table of Contents
SolSat 5 Firmware Upgrade Instructions
9100 STS
Datasheet
Solinst Low Cost Data Plan & STS Operation
STS Telemetry System Features & Specifications
9200 RRL
Datasheet
Instructions
9100 STS User Guide
1 Introduction to STS Telemetry
1.1 Compatibility
2 Home Station Hardware Setup
2.1 Network Considerations
2.2 Solinst Telemetry Software
2.2.1 System Requirements
2.2.2 Software Installation
3 STS Telemetry Hardware
3.1 STS Remote Stations
3.1.1 LED Light Identification
3.2 Datalogger Connection
3.2.1 Levelogger Connection
3.2.2 LevelVent Connection
3.3 Power Source
3.4 STS Cellular Modem
3.4.1 Wireless Carrier Requirements
3.4.2 Modem Setup
4 Program Your STS System
4.1 STS Administrator
4.2 Create New Remote Site
4.3 Assign Dataloggers to Remote Station
4.3.1 Levelogger Information Settings
4.3.2 Set Up Levelogger Measurement Parameters
4.4 Alarm Setup
4.5 Barometric Compensation Setup
4.6 Bridge an RRL (Remote Radio Link) Network
4.7 Communication Agent
4.8 STS Field Utility
4.8.1 STS Edge Tab
4.8.2 STS Diagnostics
4.8.2 STS Modem Port Settings
5 Initialize Your STS Telemetry System
6 Remote STS Updates
7 Configure Your Remote Station in Field
7.1 Cellular Signal Strength
7.1.1 Optional Antennas
7.2 Power Options
7.2.1 Battery Life Estimates
7.2.2 Solar and AC Power Options
7.3 Datalogger Deployment
8 Access Your Data
8.1 Access Database
8.2 View Using Solinst Telemetry Software
8.2.1 View Compensated Data
8.2.2 Graphing Options
8.3 File Export
8.3.1 Export All Data
9 Maintenance
9.1 System Diagnostics
9.2 Firmware Updates
9.2.1 Update In the Field
9.2.2 Remote Firmware Updates
Glossary of Terms
Table of Contents
9100 STS System Requirements
9100 STS Quick Start Guide - PDF (557 KB)
9200 RRL Remote Radio Link User Guide
1 Introduction
1.1 RRL Compatibility
2 RRL Overview
2.1 RRL Stations
2.1.1 Installing Batteries
2.2 Connecting Dataloggers and Splitters
2.2.1 Connecting Leveloggers
2.2.2 Connecting LevelVent Dataloggers
2.2.3 Connecting AquaVent Dataloggers
2.2.4 Splitters
3 Solinst Telemetry Software
3.1 System Requirements
3.2 Software Installation
4 RRL Network Configuration
4.1 Software Administrator Window
4.2 Programming a RRL Network (Software Wizard)
Step 1: Create New Site
Step 2: Network Configuration
Step 3: Configuration Progress
Step 4: Programming Your RRL Station
Step 5: Configuring Attached Dataloggers
4.2.1 Editing Datalogger Information
Setting Up Datalogger Measurement Parameters
Step 6: Confirm Station Settings
Step 7: RRL Network Configuration Summary
4.2.2 Editing RRL Networks
Editing the Network Setup
Editing RRL Stations
4.3 Barometric Compensation
4.4 Communication Agent
5 RRL Remote Utility
5.1 Self Test
5.2 Firmware Upgrade Instructions
6 RRL Station Hardware Setup
6.1 Power Sources and Antennas
6.1.1 Power Supply
6.1.2 Solar Panels
6.1.3 Antennas
6.2 Installing RRL Stations in the Field
Location and Communication Considerations
7 Viewing Site Data
7.1 Access Database
7.2 View Using STS/RRL Software
7.2.1 View Compensated Data
7.2.2 Graphing Options
7.3 File Export
7.3.1 Export All Data
Table of Contents
9200 RRL Quick Start Guide
1 Getting Started
2 Install the Software
3 Install RRL Station Batteries
4 Connect Leveloggers to RRL
5 Program RRL Stations
6 Start RRL Stations
7 Connect Power Supply
8 Install in the Field
RRL Remote Utility
View Site Data
Communication Agent
9200 RRL System Requirements
9200 Y-Splitter Instructions
