Once all Stations have been programmed, it is recommended you start each RRL Station logging as a test.
There are two options for starting your RRL Stations:
Start Stations with the Programmed Network Start Time
RRL Stations will begin logging at the date and time entered in Step 2 of the Software Wizard.
Start the Station with the Remote Utility
RRL Stations will stay in stop mode until they are started with the RRL Remote Utility.
Software Wizard Step 6 - Determine RRL Station Start Time.
After each Station is started, and the first set of data sent, the serial numbers and types of Leveloggers connected to the Station will be shown in the STS/RRL Administrator Window. You can print a copy of this screen for each Station, as a record to refer to when installing the Station in the field.
Administrator Window
